Motorola AP-51XX User Manual
Page 417

8-83
secret
Sets the EAP shared secret
1
-
63
characters) for server
1
-primary or
2
-
secondary).
With this new 2.0 firmware release, the default
password is now “motorola” instead of
“symbol.” Be cognizant of this when importing a
configuration from 1.1 to 2.0, as this shared
secret will have to be changed to motorola (after
the import) to avoid MU authentication failures.
This change can only be made using the access
point CLI.
reauth
mode
Enables or disables EAP reauthentication.
period
Sets the reauthentication period
seconds (
30
-
9999
).
retry
Sets the maximum number of reauthentication
retries
1
-
99
).
accounting
mode
Enable or disable Radius accounting.
server
Set external Radius server IP address.
port
Set external Radius server port number.
secret
Set external Radius server shared secret
password.
timeout
Defines MU timout period in seconds (1-255).
retry
Sets the maximum number of MU retries to
1
-
10
).
syslog
Enable or disable syslog messages.
ip
Defines syslog server IP address.
adv
mu-quiet
Set the EAP MU/supplicant quiet period to
1
-
65535
).
mu-timeout
Sets the EAP MU/supplicant timeout in seconds
(
1
-
255
).
mu-tx
Sets the EAP MU/supplicant TX period
1
-
65535
).