Motorola AP-51XX User Manual
Page 326
AP-51xx Access Point Product Reference Guide
7-28
1.
Select
Status and Statistics
->
MU Stats
from the access point menu tree.
2.
Highlight a specific MU.
3.
Select the
MU Details
button.
4.
Refer to the
MU Properties
field to view MU address information.
5.
Refer to the
Traffic
field to view individual MU RF throughput information.
IP Address
Displays the IP address of the MU.
WLAN Association
Displays the name of the WLAN the MU is associated with. Use
this information to assess whether the MU is properly grouped
within that specific WLAN.
PSP State
Displays the current PSP state of the MU. The
PSP Mode
field has
two potential settings. PSP indicates the MU is operating in Power
Save Protocol mode. In PSP, the MU runs enough power to check
for beacons and is otherwise inactive. CAM indicates the MU is
continuously aware of all radio traffic. Motorola recommends CAM
for those MUs transmitting with the AP frequently and for periods
of time of two hours.
HW Address
Displays the Media Access Control (MAC) address for the MU.
Radio Association
Displays the name of the AP MU is currently associated with. If the
name of the
access point
requires modification, see
QoS Client Type
Displays the data type transmitted by the mobile unit. Possible
types include
Legacy
,
Voice
,
WMM Baseline
and
Power Save
.
Setting the WLAN Quality of Service
Encryption
Displays the encryption scheme deployed by the associated MU.
Packets per second
The
Total
column displays average total packets per second
crossing the MU. The
Rx
column displays the average total packets
per second received on the MU. The
Tx
column displays the
average total packets per second sent on the MU. The number in
black represents Pkts per second for the last 30 seconds and the
number in blue represents Pkts per second for the last hour.