Motorola AP-51XX - Manual (Page 454)

AP-51xx Access Point Product Reference Guide 8-120
AP51xx>admin(network.wireless.rogue-ap)> set
Description:
Defines the access point ACL rogue AP method.
Syntax:
Example:
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)> set mu-scan enable
admin(network.wireless.rogue-ap)> set interval 10
admin(network.wireless.rogue-ap)> set on-channel disable
admin(network.wireless.rogue-ap)> set detector-scan disable
admin(network.wireless.rogue-ap)> set ABG-scan disable
admin(network.wireless.rogue-ap)> set motorola-ap enable
admin(network.wireless.rogue-ap)> set applst-ageout 10
admin(network.wireless.rogue-ap)> set roglst-ageout 10
admin(network.wireless.rogue-ap)> show
MU Scan : enable
MU Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Auto Authorize Motorola APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
For information on configuring the Rogue AP options available to the access point using the applet (GUI), see
Configuring Rogue AP Detection on page 6-55 .
set mu-scan Enables or disables to permit MUs to scan for rogue APs.
interval Define an interval for associated MUs to beacon in attempting to locate rogue APs.
Value not available unless mu-scan is enabled.
on-channel Enables or disables on-channel detection.
detector-scan Enables or disables AP detector scan (dual-radio model only).
ABG-scan Enables or disables A/BG Detector Scan Mode.
motorola-ap Enables or disables the Authorize Any AP with a Motorola MAC address option.
applst-ageout Sets the approved AP age out time.
roglst-ageout Sets the rogue AP age out time.