Motorola AP-51XX - Manual (Page 416)

AP-51xx Access Point Product Reference Guide 8-82
AP51xx>admin(network.wireless.security)> create
Description:
Defines the parameter of access point security policies.
Syntax:
create Defines the parameters of a security policy.
show Displays new or existing security policy
parameters.
set sec-name Sets the name of the security policy.
auth Sets the authentication type for WLAN to
(
none , eap , or kerberos ).
Note: Kerberos parameters are only in affect if
"kerberos" is specified for the authentication
method (set auth ).
kerb realm Sets the Kerberos realm.
server Sets the Kerberos server ( 1 -primary, 2 -
backup, or 3 -remote) to KDC IP address.
port Sets the Kerberos port to (KDC port) for
server (
1 -primary, 2 -backup, or 3 -remote).
Note: EAP parameters are only in affect if "eap"
is specified for the authentication method (set
auth ).
eap server Sets the radius server ( 1 -primary or as 2 -
secondary) IP address .
port Sets the radius server ( 1 -primary or 2 -
secondary) (1-65535).