Motorola AP-51XX - Manual (Page 386)

AP-51xx Access Point Product Reference Guide 8-52
For information on configuring VPN using the applet (GUI), see Configuring VPN Tunnels on page 6-36 .
salife Defines the name of the tunnnel the
Security Association Life Time <300-65535>
applies to in seconds.
ike opmode Sets the Operation Mode of IKE for to
Main or Aggr (essive).
myidtype Sets the Local ID type for IKE authentication for
(1 to 13 characters) to (
IP , FQDN ,
or UFQDN ).
remidtype Sets the Remote ID type for IKE authentication for
(1 to 13 characters) to (
IP , FQDN ,
or UFQDN ).
myiddata Sets the Local ID data for IKE authentication for
to . This value is not required
when the ID type is set to IP.
remiddata Sets the Local ID data for IKE authentication for
to . This value is not required
when the ID type is set to IP.
authtype Sets the IKE Authentication type for to
(
PSK or RSA ).
authalgo Sets the IKE Authentication Algorithm for
to
MD5 or SHA1 .
phrase Sets the IKE Authentication passphrase for
to .
encalgo Sets the IKE Encryption Algorithm for to
(one of
DES , 3DES , AES128 , AES192 ,
or AES256 ).
lifetime Sets the IKE Key life time in seconds for to
.
group Sets the IKE Diffie-Hellman Group for to
either
G768 or G1024 .