Motorola AP-51XX - Manual (Page 511)

8-177
AP51xx>admin(system.snmp.traps)> add
Description:
Adds SNMP trap entries.
Syntax:
Example:
admin(system.snmp.traps)> add v1v2 203.223.24.2 333 mycomm v1
admin(system.snmp.traps)> list v1v2c
----------------------------------------------------------------------
index dest ip dest port community version
----------------------------------------------------------------------
1 203.223.24.2 333 mycomm v1
admin(system.snmp.traps)> add v3 201.232.24.33 555 BigBoss none md5
admin(system.snmp.traps)> list v3 all
index : 1
destination ip : 201.232.24.33
destination port : 555
username : BigBoss
security level : none
auth algorithm : md5
auth password : ********
privacy algorithm : des
privacy password : ********
For information on configuring SNMP traps using the applet (GUI), see Configuring SNMP RF Trap Thresholds on page 4-37 .
add v1v2
Adds an entry to the SNMP v1/v2 access list with the destination IP address set to , the destination UDP port set to
, the community string set to (1 to 31 characters), and the SNMP version set to .
v3
Adds an entry to the SNMP v3 access list with the destination IP address set to , the destination UDP port set to
, the username set to (1 to 31 characters), and the authentication type set to one of
none , auth , or auth/
priv .
The following parameters must be specified if is not none :
Authentication type set to md5 or sha1
Authentication password (8 to 31 chars)
The following parameters must be specified if is set to auth/priv :
Privacy algorithm set to des or aes
Privacy password (8 to 31 chars)