Motorola AP-51XX - Manual (Page 554)

AP-51xx Access Point Product Reference Guide 8-220
AP51xx>admin(system.ntp)> set
Description:
Sets NTP parameters for access point clock synchronization.
Syntax:
Example:
admin(system.ntp)> set mode enable
admin(system.ntp)> set server 1 203.21.37.18
admin(system.ntp)> set port 1 123
admin(system.ntp)> set intrvl 15
admin(system.ntp)> set zone 1
For information on configuring NTP using the applet (GUI), see Configuring Network Time Protocol (NTP) on page 4-39 .
set mode Enables or disables NTP.
server Sets the NTP sever IP address.
port Defines the port number.
intrvl Defines the clock synchronization interval used between the access point and
the NTP server in minutes (15 - 65535).
time Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the
month, [hh] - hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of the
zone.
zone Defines the time zone (by index) for the target country.