Motorola AP-51XX - Manual (Page 419)

8-85
For information on configuring the encryption and authentication options available to the access point using the applet (GUI), see
Configuring Security Options on page 6-2 .
type Sets the TKIP key type.
key <256 bit key> Sets the TKIP key to <256 bit key>.
phrase Sets the TKIP ASCII pass phrase to
(8-63 characters).
ccmp rotate-mode Enables or disabled the broadcast key.
interval Sets the broadcast key rotation interval to
in seconds (
300 - 604800 ).
type Sets the CCMP key type.
phrase Sets the CCMP ASCII pass phrase to phrase> (8-63 characters).
key <256 bit key> Sets the CCMP key to <256 bit key>.
mixed-mode Enables or disables mixed mode (allowing WPA-
TKIP clients).
preauth Enables or disables preauthentication (fast
roaming).
add-policy Adds the policy and exits.
.. Disregards the policy creation and exits the CLI
session.
CAUTION If importing a 1.1 baseline configuration onto the 2.0 baseline, the 802.1x EAP Radius shared secret
password will remain “symbol,” instead of “motorola” (as now required with the 2.0 baseline).
If the shared secret password is not changed to “motorola” there will be a shared secret mis-match
resulting in MU authentication failures. This password cannot be set using the access point Web UI,
and must be changed using the CLI.
!