Motorola AP-51XX User Manual
Page 213
Network Management
5-65
4.
Configure the
Bandwidth Share for Each WLAN
field to set a raw weight (for WLANs
using the Weighted Round-Robin option) for each WLAN. The weight% changes as the
weight is entered.
If a WLAN has not been enabled from the
Wireless
screen, it is not configurable using the
Bandwidth Management
screen. To enable a specific WLAN, see
.
5.
Click
Apply
to save any changes to the Bandwidth Management screen. Navigating away
from the screen without clicking Apply results in all changes to the screens being lost.
6.
Click
Undo Changes
(if necessary) to undo any changes made. Undo Changes reverts the
settings displayed on the Bandwidth Management screen to the last saved configuration.
7.
Click
Logout
to securely exit the Access Point applet. A prompt displays confirming the
logout before the applet is closed.
Weighted Round-
Robin
If selected, a weighting (prioritization) scheme (configured within
the QoS Configuration screen) is used to define which WLANs
receive
access point
resources first.
WLAN Name
Displays the name of the WLAN. This field is read-only. To change
the name of the WLAN, see
Creating/Editing Individual WLANs on
.
Weight
This column is not available unless
Weighted Round-Robin
is
selected. Assign a weight to each WLAN. This percentage equals
the
access point
bandwidth share for that WLAN when network
traffic is detected.
Weight (%)
This column is automatically updated with the appropriate WLAN
bandwidth share when the
Weight
is modified.
QoS Policy
Displays the name of the QoS policy defined for each WLAN within
the
Quality of Service for WLAN
screen. If no policy has been
set, the WLAN uses the default policy. For information on assigning
QoS policies for specific WLANs, see