Motorola AP-51XX - Manual (Page 307)

Monitoring Statistics 7-9
5. Click the Clear LAN Stats button to reset each of the data collection counters to zero in
order to begin new data collections. The RX/TX Packets and RX/TX Bytes totals remain at
their present values and are not cleared.
6. Click the Logout button to securely exit the Access Point applet. There will be a prompt
confirming logout before the applet is closed.
7.2.1 Viewing a LAN’s STP Statistics
Each access point LAN has the ability to track its own unique STP statistics. Refer to the LAN STP
Stats page when assessing mesh networking functionality for each of the two access point LANs.
Access points in bridge mode exchange configuration messages at regular intervals (typically 1 to 4
seconds). If a bridge fails, neighboring bridges detect a lack of configuration messaging and initiate
a spanning-tree recalculation (when spanning tree is enabled).
To view access point LAN’s STP statistics:
1. Select Status and Statistics -> LAN Stats -> LAN1 Stats (or LAN2 Stats) > STP Stats
from the access point menu tree.
TX Carrier The TX Carrier field displays the number of TCP/IP data carrier
errors.