Motorola AP-51XX - Manual (Page 187)

Network Management 5-39
5. Click Apply to save any changes to the New MU ACL Policy or Edit MU ACL Policy screen
and return to the Mobile Unit Access Control List Configuration screen. Navigating away
from the screen without clicking Apply results in changes to the screens being lost.
6. Click Cancel to securely exit the New MU ACL Policy or Edit MU ACL Policy screen and
return to the Mobile Unit Access Control List Configuration screen.
7. Click Logout within the Mobile Unit Access Control List Configuration screen to securely
exit the Access Point applet. A prompt displays confirming the logout before the applet is
closed.
5.3.1.3 Setting the WLAN Quality of Service (QoS) Policy
The access point can keep a list of QoS policies that can be used from the New WLAN or Edit
WLAN screens to map to individual WLANs. Use the Quality of Service Configuration screen to
configure WMM policies that can improve the user experience for audio, video and voice applications
by shortening the time between packet transmissions for higher priority (multimedia) traffic.
Use the Quality of Service Configuration screen to define the QoS policies for advanced network
traffic management and multimedia applications support. If the existing QoS policies are insufficient,
a new policy can be created or an existing policy can be modified using the
New QoS Policy or Edit
QoS Policy screens. Once new policies are defined, they are available for use within the New
WLAN or Edit WLAN screens to assign to specific WLANs based on MU interoperability
requirements.
Motorola recommends using the New QoS Policy and Edit QoS Policy screens strategically to name
and configure QoS policies meeting the requirements of the particular WLANs they may to. However,
be careful not to name policies after specific WLANs, as individual QoS policies can be used by more
than one WLAN. For detailed information on assigning QoS policies to specific WLANs, see
Creating/Editing Individual WLANs on page 5-30 .
To configure QoS policies:
1. Select Network Configuration -> Wireless -> QoS from the access point menu tree.
The Quality of Service Configuration screen displays with existing QoS policies and their
current WLAN (if mapped to a WLAN).
Add Click the Add button to create a new entry using only the Start
MAC column to specify a MAC address, or uses both the Start
MAC and End MAC columns to specify a range of MAC addresses.
Delete Click the Delete button to remove a selected list entry.