GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 85)

GFK-1115 Chapter 5 PCS Connection Editor 5 - 5
5
With the cursor in the PLC Type line, press
↵ ↵
to display a selection window that lists PLCs.
After selecting a PLC Type, press F4 to accept the new connection and return to the Connection
List window.
Deleting Connections
Connections can be deleted from the connection list by highlighting the desired connection and
pressing the F3 Del function key.
After F3 Del is pressed, the selected connection disappears from the list.
Editing PLC Node Parameters of a Connection
The F4 PLC Node Parameters function key has no effect on Internal connections. A more
thorough discussion of Genius protocol parameters can be found in “Configuring Communication
with the PLC” in chapter 4.