GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 82)

5 - 2 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
5
General Information
All of the variables (symbolic variable names) that are to be used in a project must be assigned an
address in the PLC CPU.
Every PLC connected to the Panel must be entered in the project's connection list. Each of these
entries accesses an additional list called the variable assignment table (VAT), in which all
variables of a connection are assigned a PLC address (tagname).
Accessing the Connection List
To edit or insert connections, the Connection List, must be opened from the Main menu. (The
Connection List can only be accessed if a project is loaded.) Select the Connections option from
the F2 Edit pull-down menu, or press Ctrl + C.
The Connection List window is displayed: