GE Monogram GE Fanuc Automation GFK-1115 - Manual (Page 112)

6 - 16 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
Section 5 Creating the Demo Project
General Information
This section presents a step by step description explaining how to create a demo project. The
section also contains useful information for creating your own projects in the future.
More information on using PCS can be found in the PANELWARE™ Software Configuration
Reference Manual (GFK-0849). This section is based on chapter 10, “Editing a Project”, in that
manual.
Creating a Project
The list below shows the steps to be taken in creating a new project:
1. Prepare a basic concept before you start.
2. Create the new project.
3. Define hardware setup (choose all connections).
4. Define key assignments.
5. Create the required pictures.
6. Create connection list.
7. Define your text groups.
8. Bind pictures to the project.
9. Check for errors, particularly in keycode table.
10. Compile your project.
11. Download the project to the Panel.