Errors during installation – GE Monogram GE Fanuc Automation GFK-1115 User Manual
Page 168
B - 2
PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995
GFK-1115
B
Errors During Installation
Installation could not be ended properly!
Setup program cannot be called!
Check that the following conditions are met:
■
PC must contain an 80286 or higher type processor.
■
To install the PCS, the PC must have at least 2 MB hard disk space available.
■
PC must have at least 640 KB RAM (500 KB must be available). If enough RAM is not
available, remove the necessary memory-resident programs.