Fortinet FortiGate 50A - Manual (Page 256)

256
Fortinet Inc.
Configuring traffic logging Logging and reporting
3 Select Apply.
Figure 45: Example traffic filter list
Adding traffic filter entries
Add entries to the traffic filter list to filter the messages that are recorded in the traffic
log. If you do not add any entries to the traffic filter list, the FortiGate unit records all
traffic log messages. You can add entries to the traffic filter list to limit the traffic logs
that are recorded. You can log traffic with a specified source IP address and netmask,
to a destination IP address and netmask, and for a specified service. A traffic filter
entry can include any combination of source and destination addresses and services.
To add an entry to the traffic filter list
1 Go to Log&Report > Log Setting > Traffic Filter.
2 Select New.
3 Configure the traffic filter for the type of traffic that you want to record on the traffic log.
4 Select OK.
The traffic filter list displays the new traffic address entry with the settings that you
selected in
“Enabling traffic logging” on page 255 .
Name Type a name to identify the traffic filter entry.
The name can contain numbers (0-9), uppercase and lowercase
letters (A-Z, a-z), and the special characters - and _. Spaces and
other special characters are not allowed.
Source IP Address
Source Netmask Type the source IP address and netmask for which you want the
FortiGate unit to log traffic messages. The address can be an
individual computer, subnetwork, or network.
Destination IP Address
Destination Netmask Type the destination IP address and netmask for which you want the
FortiGate unit to log traffic messages. The address can be an
individual computer, subnetwork, or network.
Service Select the service group or individual service for which you want the
FortiGate unit to log traffic messages.