Configuring radius support, Adding radius servers, Deleting radius servers – Fortinet FortiGate 50A User Manual
Page 174: Adding radius servers deleting radius servers
174
Fortinet Inc.
Configuring RADIUS support
Users and authentication
Configuring RADIUS support
If you have configured RADIUS support and a user is required to authenticate using a
RADIUS server, the FortiGate unit contacts the RADIUS server for authentication.
This section describes:
•
•
Adding RADIUS servers
To add a RADIUS server
1
Go to User > RADIUS.
2
Select New to add a new RADIUS server.
3
Type the Name of the RADIUS server.
You can type any name. The name can contain numbers (0-9), uppercase and
lowercase letters (A-Z, a-z), and the special characters - and _. Other special
characters and spaces are not allowed.
4
Enter the Server Name or IP address of the RADIUS server.
5
Enter the RADIUS server secret.
6
Select OK.
Figure 18: Example RADIUS configuration
Deleting RADIUS servers
You cannot delete a RADIUS server that has been added to a user group.
To delete a RADIUS server
1
Go to User > RADIUS.
2
Select Delete
beside the RADIUS server name that you want to delete.
3
Select OK.