Fortinet FortiGate 50A - Manual (Page 124)

124
Fortinet Inc.
Adding and editing administrator accounts System configuration
Adding new administrator accounts
From the admin account, use the following procedure to add new administrator
accounts and control their permission levels.
To add an administrator account
1 Go to System > Config > Admin.
2 Select New to add an administrator account.
3 Type a login name for the administrator account.
The login name can contain numbers (0-9), uppercase and lowercase letters
(A-Z, a-z), and the special characters - and _. Other special characters and spaces
are not allowed.
4 Type and confirm a password for the administrator account.
For improved security, the password should be at least 6 characters long. The
password can contain any characters except spaces.
5 Optionally type a Trusted Host IP address and netmask for the location from which the
administrator can log into the web-based manager.
If you want the administrator to be able to access the FortiGate unit from any address,
set the trusted host to 0.0.0.0 and the netmask to 0.0.0.0.
To limit the administrator to only access the FortiGate unit from a specific network, set
the trusted host to the address of the network and set the netmask to the netmask for
the network. For example, to limit an administrator to accessing the FortiGate unit
from your internal network, set the trusted host to the address of your internal network
(for example, 192.168.1.0) and set the netmask to 255.255.255.0.
6 Set the Permission level for the administrator.
7 Select OK to add the administrator account.
Editing administrator accounts
The admin account user can change individual administrator account passwords,
configure the IP addresses from which administrators can access the web-based
manager, and change the administrator permission levels.
Administrator account users with Read & Write access can change their own
administrator passwords.
admin Has all permissions. Can view, add, edit, and delete administrator accounts.
Can view and change the FortiGate configuration. The admin user is the only
user who can go to the System Status page and manually update firmware,
update the antivirus definitions, update the attack definitions, download or
upload system settings, restore the FortiGate unit to factory defaults, restart
the FortiGate unit, and shut down the FortiGate unit. There is only one admin
user.
Read & Write Can view and change the FortiGate configuration. Can view but cannot add,
edit, or delete administrator accounts. Can change own administrator account
password. Cannot make changes to system settings from the System Status
page.
Read Only Can view the FortiGate configuration.