Viewing a dhcp server dynamic ip list, Configuring the modem interface – Fortinet FortiGate 50A User Manual
Page 107
Network configuration
Configuring the modem interface
FortiGate-50A Installation and Configuration Guide
107
7
Select OK.
Viewing a DHCP server dynamic IP list
You can view the list of IP addresses that the DHCP server has assigned, their
corresponding MAC addresses, and the expiry time and date for these addresses.
To view a DHCP server dynamic IP list
1
Go to System > Network > DHCP.
2
Select Dynamic IP.
3
Select the interface for which you want to view the list.
Configuring the modem interface
You can connect a modem to the FortiGate unit and use it as either a backup interface
or standalone interface.
• In backup mode, the modem interface automatically takes over from a selected
ethernet interface when that ethernet interface is unavailable.
• In standalone mode, the modem interface is the connection from the FortiGate unit
to the Internet.
When connecting to the ISP, in either configuration, the FortiGate unit modem can
automatically dial up to three dialup accounts until the modem connects to an ISP.
•
Connecting a modem to the FortiGate unit
•
•
Connecting to a dialup account
•
•
•
•
•
Adding firewall policies for modem connections
IP
Enter an IP address. The IP address must be within the IP pool added to the
selected scope.
MAC
Enter the MAC address of the device.
Name
Optionally, specify a name for the IP and MAC address pair.
Note: The reserved IP cannot be assigned to any other device. You can only add a given IP
address or MAC address once.