Gradall 534B (9103-1390) Service Manual - Manual (Page 228)

SOMA OF AMERICA
SPECIFICATION: STB 1-203 PAGE: 1
ENGINEERING STANDARD OFFICE
REGISTER: STB SECTION: 1 SERIES: 200
INSTRUCTIONS FOR THE ASSEMBLY OF PLANETARY HUB REDUCERS
2.68 - 3.55 - 4.63 - 5.6
Planetary Hub Reducer type 3.55 Planetary Hub Reducer type 5.6
1 Fit the seal land according to specification STC 2-202
2 Fit the oil seal according to specification STC 2-203.
3 Adjust the spindle nut according to specification STB 3-201 for on and off highway
vehicles and according to specification STB 3-202 for rough terrain vehicles.
4 Adjust the end shaft positioner according to specification STB 1-201.
5 Prepare cover plate face and fixing screws according to specification STC 2-205.
6 Fit the cover plate to the planet gear carrier (ratios 4.63 - 5.6) or to the hub (ratios
2.68 - 3.55).
Screws
φ
10:44.9N.m./33.12 foot pounds
Screws
φ
12:76 9N.m./56.72 foot pounds