Gradall 534B (9103-1390) Service Manual - Manual (Page 220)

PLANETARY HUB REDUCERS
Remove bolts. If necessary remove the spacer Remove the seal race with puller
In case of brake change, save
the dust cover.
ASSEMBLY OF THE PLANETARY Install the brake spacer Torque the bolts
HUB REDUCER Torque the spacer bolts according
to specification STB 1-406.
Install the brake: Position carefully
Look according to specification the cam with regard to the axle
housing.
Fit the tow bearing cups Install the bearing cone Install the bearing cone on the ring
Insert the extractor gear carrier by heating it to 80°C ap-
Install the oil seal according to prox. (176°F)
specification STC 2-103.
• •
•
l
•
•
• •
•
•
•
• • •