Gradall 534B (9103-1390) Service Manual - Manual (Page 203)

CORRECTION SHEET
Page 31 SPECIFICATIONS
Item 4, change “UPPER ADJUSTMENT” to “UPPER SHIM PACKAGE”.
Line one under Item 4, change the word “adjustment” and replace
with the word “shim package”.
Item 5, FINAL ASSEMBLY:
Line four under Item 5, change the number “120” to “125”.
Line five under Item 5, change the number “120” to “125”.
Page 33 SPECIFICATIONS:
Line two, change the number “84” to “184”.
Line four, change the number “.0045” to “.0059”.
Page 34 SPECIFICATIONS:
Omit on lines six thru nine, the word “foot”
Page 35 SPECIFICATIONS:
Line fifteen, change the word “mettalic” to “metalic”.
Add line twenty-two, “Addition of an E.P. (Extreme Pressure)
additive.” See TSB 023-86.
Page 36 SPECIFICATIONS:
Line fourteen, change the measurement from “6mm (0.236in).” to
“4.25 ± .25mm (0.167 .010).” See TSB 017-84.
Page 42 SPECIFICATIONS:
Under “CHECKING AND FILLING PROCEDURE”.
Sentence to read, “The unit or the vehicle must be level. Fill
the unit through the oil plug until overflow, arrow on cover pointed
downward.”
Corrected oil capacities, see insert.
Page 44 CONVERSION FACTORS:
Add to convert table, “Meter Deca Newton’s (madN), into foot pounds,
multiply by 7.376.
(2)