Gradall 534B (9103-1390) Service Manual - Manual (Page 152)

-27-
Figure 150
Install new oil sealing ring on output shaft. NOTE:
New ring must be sized before shaft can be assembled
in transmission housing.
A sizing tool can be made for ease of sizing oil
s e a l r i n g . S e e F i g u r e 1 5 1 .
Figure 149
Install gear retainer ring
Figure 151
Oil sealing ring tool.
Figure 153
Install low clutch rear bearing.
The 2 speed trasmission will not have a clutch on
the output shaft.
Figure 148
Locate gear and clutch disc hub on forward clutch
shaft. NOTE: The 2 speed transmission will have
Only a gear and not a clutch disc hub on it.
Figure 152
Install output shaft and 3rd speed clutch.