Gradall 534B (9103-1390) Service Manual - Manual (Page 140)

Figure 81
Install low speed gear inner bearing.
Figure 82
Install low speed gear bearing spacer.
Figure 83
Install low clutch driven gear and hub into clutch
drum. Align splines on clutch hub with internal teeth
of friction discs. Tap gear into position. Do not force
this operation. Gear splines must be in full position
Figure 86
Tap bearing into position.
Figure 85
Position low gear front bearing spacer and bearing
on clutch shaft.
Figure 84
Install low speed gear outer bearing.
-15-