Gradall 534B (9103-1390) Service Manual - Manual (Page 202)

CORRECTION SHEET
Enter page numbers at the bottom of each page starting with
page number one (MAINTENANCE RECOMMENDATIONS) to page number
forty-four (CONVERSION FACTORS).
Page 1 MAINTENANCE RECOMMENDATIONS:
Part II, Para 2, Line 4, omit the words “the cone”.
Page 15 PLANETARY HUB REDUCERS:
Second picture omit the second sentence, “Remove the
planet gear carrier”.
Page 16 PLANETARY HUB REDUCERS:
Third picture change the word “tapper” to “taper”.
Page 18 PLANETARY HUB REDUCERS:
Second picture change the word “tapper” to “taper”.
Page 23 STEERING PARTS:
Forth picture, change “A =X-(Y+Y)” to “A =X-(Y+Z)”.
Sixth picture, remove the torque “390”. See TSB 025-86.
Page 27 SPECIFICATIONS:
Add block 10 “Apply silicone to mating surfaces”.
Add block 11 “Apply Loctite to bolt threads”.
Page 30 SPECIFICATIONS:
Line 14, change “PDI25:2500kg (55125 lbs/2.756 tons)” to
“PDI25:2500kg (5512 lbs/2.756 tons”).
Page 31 SPECIFICATIONS:
Item 2, Change “ASSEMBLY OF THE CARDEN JOINT SPHERICAL SHELL”
to “ASSEMBLY OF THE CONSTANT VELOCITY JOINT SPHERICAL SHELL”.
Item 3, change “LOWER ADJUSTMENT” to “LOWER SHIM PACKAGE”.
Line one under Item 3, omit the words “adjustment with”.
Line two under Item 3, omit the words “spheres middles” and
replace with “and the constant velocity joint”.
Line three under Item 3, omit the word “adjustment” and replace
with the word “shim”
( 1)