I-View AnyNet-0401Mini Embedded NVR - Manual (Page 74)

74
5.)
Select the available devices to locate on the eMap from the device tool bar.
6.)
Click and drag the device to the suitable location with the left mouse key. Repeat this process for other
devices setup.
7.)
Click “ ” to “Save & Exit” or “Exit” without saving the settings.
If the user would like to enable notification via flashed icon on the e-Map when motion or alarm is
triggered, you will need to enable “Pop up event notification” as well from “System
Configuration” in Chapter 4-6-1.
If the system supports dual monitor, the eMap will automatically pop up to secondary monitor
(Monitor 02) when Witness Pro launched. The user can also click “ ” from screen of eMap to
assign eMap to “Monitor 01” or “Monitor 02”.
Function descriptions of eMap:
Please click “ ” from video control panel to bring out eMap screen.
1.)
eMap: Click “eMap” tab to
show the floor plan of eMap,
detail information of NVR, and
status of view logs and current
remote users. Click “ ” from
cameras to view the pop-up live
video or send the live video to
TV-out monitor.