9. peripherals setup – I-View AnyNet-0401Mini Embedded NVR User Manual
Page 91
91
4-9.
Peripherals setup
Click “ ” icon to set up I/O configuration and parameters from “Peripherals setup”.
F
If the NC-3213USB NetCom module has been installed, all functions icons can be enabled.
Otherwise only “Emergency notification setup” and “Finger-key access control setup”
can be enabled. The user can check if the NC-3213USB NetCom module installed properly
by this function.
a.) NetCom output relays setup (Optional)
While NC-3213USB is installed in the NVR system,
you can click “NetCom output relays setup”
Function Description:
Device: Select the device for setup.
No/Name: Type “Controller name”
corresponding to the desired relay number.
Transient time: Type the controller’s working
period when relay is triggered.
Control: Control the Relay output.
a
b
c
d
e
f