I-View AnyNet-0401Mini Embedded NVR - Manual (Page 162)

162
Connect to multi-group: Allow enabling multi-group connection function.
Storage configuration: Allow to setup the storage configuration function.
Setup date and time: Allow to adjust the date/time of platform.
Controller access: Allow to use control panel of FreeView Pro , such as remote control the I/O
and PTZ camera..
Exit application: Allow to close the FreeView Pro program.
Please follow the steps below to modify the supervisor’s name and password:
Step 1. Type new supervisor name and password.
Step 2. Press “Select all” (only for supervisor) for the privileges.
Step 3. Click “Save” to add the user in the list.
Please remember removing the default supervisor “root”, otherwise there will be two supervisors.
Set privilege for additional users
1.)
Type username and password
2.)
Select privileges and click “ Save” icon.
3.)
To create other users, please repeat Step 1 to 2.
4.)
Click “
” to search the username which has
been created. Type the username from “Search for”
field and check “Go top” if the user would like to search the list from the beginning of the
username list.
1. If the supervisor’s password or username is lost, FreeView Pro must be reinstalled. All previous
settings will be lost. However, saved videos will not be erased.
2. Password must consist of 0-9 and a-z or A-Z.
3. The password is case sensitive. (PaSsWoRd is not the same as password)
4. Please remember to click “ ” after set up from each tab.
Remove/modify user privileges
1.)
Select the user in the username list.
2.)
Click “Delete” to remove user or double-click on the username to modify user privileges.