I-View AnyNet-0401Mini Embedded NVR - Manual (Page 108)

108
5.)
Main Monitor 1 Video Rotation (On): Show 17-32 Ch full or split screen rotation on the TV
monitor (Composite) VGA monitor (Live video display)
6.)
Spot Monitor 1 Video Rotation (On): Show 17-32 Ch full or split screen rotation on the TV
monitor (Composite) VGA monitor (Live video display).
7.)
) Show IP Camera on second monitor: Click to switch IP cameras to the secondary monitor if
the NVR supports dual monitor. (This option will only be shown when the second VGA
monitor is installed)
8.)
Show 17-32 cameras on second monitor: Click to switch “17-32” split screen to the second
monitor if the NVR supports dual monitor. (This option will only be shown when the second
VGA monitor is installed)
PTZ control panel function description (For Hybrid DVR only)
Control the pan/tilt/zoom function: Move the Mouse to icon and then click left button to
choice the PTZ camera number, and the PTZ camera has been selected, the camera number
will be showed on the black circle. Click “Arrows” to move the Pan/Tilt direction and click
the icon to control the zoom function.
PTZ control buttons: The user needs to install the PTZ camera and the controller board
(NC-485USB or NC-3213USB) or IP camera which supports the RS-485 protocol first for
PTZ cameras control functions. Please make sure to Netcom module, PTZ ID address, baud
rate, protocol and cable connection is correct before setting from PTZ control buttons.
Set up preset positions:
Step 1.
Move the PTZ camera to the position
where you would like to set up for preset
position.
Step 2.
Click “ ” to show “Set up
preset positions” window.
Step 3.
Click “Set” to set the current
position of PTZ camera as preset position.
Step 4. Type the location for the preset position.