I-View AnyNet-0401Mini Embedded NVR User Manual
Page 30
30
Surveillance Server Functions Descriptions:
1.
Login/Logout Button
: You can log out as one user and log in as another with different
privileges. The default username is “root” and the default password is “123”. This default user
has full privileges.
2.
Exit Button
: Exit Witness Pro program. If a crossed-hand icon appears instead, you must
first log out and next log in as a user with exit privilege.
3.
Minimize Button
: Minimize this program into the taskbar. If a crossed-hand icon appears
instead, you must first log out and log in again as a user with exit privilege.
4.
Full Screen
: Enlarge to a full spilt screen, hide the tool bars and control panel. Or you can
choice the current software screen (Such as eMap, Playback, Split cameras) to show on which
monitor if there are more than 2 monitors connected this NVR.
Please make sure the resolution of both monitor setting is the same.
5.
: Click to select full screen or other multi-spilt screens.
: Click to switch the previous spilt screen or next spilt screen.
: Click to leave full screen and bring back the tool bars and control panel.
: Click to fix this control bar on the screen.
6.
Video Display Screen: Display your enabled video channels. Double click on any video channel
to enlarge its video images, and double click again to come back to the initial display mode.
Right-click on any video channel to fine-tune the video parameters, take a snapshot or hide the
current channel’s video images.
7.
Cameras configuration : Set up various abilities (e.g. recording methods, alarm Notify,
motion detection, failure notifications, etc.) for each individual audio/video channel.
8.
Video playback : Run any of the following playback programs: “Video playback”,
“Synchronized playback”, “Text insert playback”, and “ezBackup”. Please refer to Chapter
3-4 for detail information and setup.
9.
Remote access setup : Set up your NVR system network parameters and remote access
capabilities.
10.
System configuration : Configure the surveillance server’s main general settings. There