I-View AnyNet-0401Mini Embedded NVR - Manual (Page 165)

165
Chapter 7. Mobile device remote viewing Software
We provide remote viewing software for viewing the video in NVR via TCP/IP with the PDA, smart
phone, or mobile phone with supported motion JAVA. The descriptions are shown as below:
The PDAView Pro is a remote view application for PDA device to remote viewing NVR and
control PTZ if installed. This software can be installed to the PDA with Pocket PC 2002 or 2003.
The MobileView Pro is a remote view application for smart phone to remote viewing NVR and
control PTZ if installed. The software can be installed to the Smart phone with Windows Mobile 5.0
or above.
ezMobileServer program that supports all kind mobile phones with supported motion JAVA that
can connect to the Internet.
The main purpose of remote viewing programs is to provide a way to connect to the NVR Server and
monitor the cameras when you do not have access to a PC. With PDA or Mobile phone, you can
monitor security and surveillance site via the Wireless LAN or Internet at anytime in anywhere.
7-1.
PDAView & MobileView program installation
You can find out the PDAView & MobileView program from the CD which comes with the NVR
card or NVR. You can remote access the NVR via mobile phone through the Internet, 3G modem
or LAN.
To install the PDAView Pro or MobileView program into a PDA or Windows Mobile Phone, please
follow the installation steps below:
1.
Click the lug your PDA or Smart Phone via USB or Com port to a PC installed with Microsoft
ActiveSync.
2.
Run Micros oft ActiveSync in the connected PC and make sure both the PDA and PC are
synchronized.
3.
Insert our CD into the CD-ROM drive of the PC and run “Install.exe“ in the CD-ROM root
directory.
4.
In the setup dialog box select “PDAView Pro” “MobileView Pro” and click “Next”.
5.
Click Brows if you wish to specify another destination directory; otherwise click “Next” and
follow the rest of the instruction to complete the installation.