I-View AnyNet-0401Mini Embedded NVR - Manual (Page 28)

28
The difference IP camera brand has its own “Find” and “Advance setup” setup diagram and
setting process. For the detail information, please refer to the IP camera operation menu.
HTTP port & RTSP port: The both port number must be matched the setting of IP camera which
you want to connect.
Display streaming: You can select the “Dual streaming” or “None” mode; If you select the
“Dual streaming” mode, the live display video will show lower resolution
(320*240/640*480/720*480) for split video and higher resolution (same as recording resolution;
such as 1920*1080) for pop-up to single video on the screen. This Dual streaming mode for live
display can save a huge CPU loading when decoding the video streaming.
Capture audio: You can record sound by microphone from audio input port of IP camera.
Synchronization with the NVR time: Check to synchronize the time of IP camera with NVR.
Condition (AWB): Choice the parameters to suit for the camera install location.
Reboot: Click this icon will reboot the IP camera. .
Setup: Click this icon for detail setting of IP camera (refer to I-View’s IP camera); you may not
need to I.E. Browser for the detail IP camera setting. Please refer the diagram as below: