Chapter 5. accessory programs, Ezwebserver - ie browse server – I-View AnyNet-0401Mini Embedded NVR User Manual
Page 111

111
Chapter 5. Accessory Programs
This chapter will discuss the NVR’s accessories programs and set up for each function.
ezWebServer - IE Browse Server
This function is to provide user for remote monitoring with IE browser via Internet.
Setup in local host NVR sever:
Step 1.
Click “ezWebserver” from “ezTools”.
Step 2.
Check “Enable auto run system” to auto run ezWebServer when start the Witness Pro
system every time.
Step 3.
Click “Set up ezWebServer” and fill out the NVR’s IP address for “Web IP address”
section. For detail about the static IP address, please contact your ISP provider. Please note
if you like to connect the NVR through both “Internet” and “LAN”, do not fill this
section.
Step 4.
Click “Web File”, fill out the information in each section of “Demo.htm” interface, and
click “Generator” to complete the settings.
“Demo.htm” Setup interface section:
Connection Type: Select “IP Address” or “ID Code (For
Dynamic IP address connection)” for connection.
NVR IP Address: Type the NVR IP address if “IP
Address” is selected for connection type.
ID Code: Type the ID code if “ID Code” is selected for
connection type.
Port number: Type the port number for remote connection