I-View AnyNet-0401Mini Embedded NVR - Manual (Page 150)

150
Remote control setup: Set up to remote control NVR Server via ezRClient and 2-way audio via
ezCTalk.
Step 1.
Type the port and password
for connection via ezRClient
from “Remote setup NVR”
field.
Step 2.
Type the port and password
for connection via ezCTalk
from “2-Way audio” field.
eMap edit: The user can create an eMap to locate the positions of cameras, and other devices and
set up the contact information for notification. When the cameras or other devices on the map are
triggered, the triggered devices will show flash on the map at the same time. And also can connect
to the devices or stop alarm when the icons flash.
Step 1.
Click and browse the map file from the local folder and click “Update” icon after the
user selects the Map file. (The map file can be a BMP or JPG file.)
Step 2.
Select the available devices from the device tool bar.
Device types