I-View AnyNet-0401Mini Embedded NVR - Manual (Page 52)

52
occurred on this camera.
Enable notification: Each camera can have its own unique setup for notifications when video
loss occurred.
Shift PTZ position: Set one or more of your connected PTZ cameras to move for one or more
preset positions when video loss occurs on this particular camera.
Trigger output relays: Select the output relays from Relay 01 to 13 in “Controller board”
(NC-3213USB) or select the output relays from each NC-180AZ PTZ receiver module when
video loss occurred. The NVR can automatically turn ON external devices (such as siren horns,
strobe lights, ceiling room lights, etc.) when video loss occurred on this camera.
POS & Access Controller (Optional)
If the NVR is integrated with POS system and Access Controller, the text of POS and Access
Controller can be displayed on the screen and recorded with the video for specific video clip playback
search easily. After installing the hardware of POS text inserter system and Access Controller, please
click “POS & Access Controller” tab from “Camera configuration” and follow the instructions
below for setup.