4. ezclock - auto-synchronized time – I-View AnyNet-0401Mini Embedded NVR User Manual
Page 121

121
5-4.
ezClock - Auto-synchronized time
Sometimes the NVR’s clock time can become behind or forward compared to the actual time.
“ezClock” will automatically adjust the user’s NVR’s clock every once in a while, depending on the
user’s setting in the ezClock setup. This section will show the user how to set up ezClock.
Step 1.
Click “ezClock” from “ezTools”
Step 2.
Check “Run ezClcok when windows starts” to automatically run ezClock when the user turn
on the PC.
Step 3.
Click “ezClock Setup“ button and type the user’s favorite Time Server’s DNS address or IP
address that the user would like to use to synchronize the NVR’s clock, or simply keep the
default Standard Time Server as it is.
Step 4.
Type the duration to synchronize the clock of Witness Pro with the selected Time Server in
“Synchronize Every” field.
Step 5.
Click “
” to test the local time and Server time.
Step 6.
Click “OK” to complete the setup.