I-View AnyNet-0401Mini Embedded NVR - Manual (Page 164)

164
6-2-7.
Group view mode
Click “Group view mode “icon to enable “Connect to multi groups “ function. You can click
the “Group view mode “ icon to enable /disable “ Connect to Multi NVRs” function. You need to
setup the NVR groups from “Communication book “ tab before to run the Group view mode. You
can setup the connection password, assign the video of NVR group on the specify monitor, split video
display and auto rotation Group video screen from “Communication book “ tab. The system will
follow up the pre-configuration to display the Group video on the screen automatically when you
enable “ Connect to multi groups “ tab. You can check the NVR groups list on the individual
monitor, and also enable/disable the rotation of Group video on the monitor from the “Group view
mode “ tab. As for the setup the NVR group, please refer the detail setup from Chapter 6-2-2.
6-2-8.
Setup Storage configuration
Click “Storage configuration “icon to setup the video
recording on the storage device and the setting diagram will
show as right site. This function description same as the
Storage configuration of Witness Pro, the description of
detail process please refers to the Chapter 4-10.
6-2-9.
Remote control setup
Click “Remote control setup “icon to setup the remote control function – Remote configure
NVR via ezRClient program and 2-way audio via ezCTalk program.
The detail process description of 2-way audio please refers to the Chapter 5-2.