I-View AnyNet-0401Mini Embedded NVR - Manual (Page 45)

45
Enable Pop up video: (For Hybrid DVR only)
Enable alarm siren: The NVR can sound an alarm upon motion detection. Make sure your
NVR is equipped with a pair of PC speakers. Click button for setup.
Enable notification: Notification by phone
call, SMS message, email notifies, upload to
FTP server and live videos transferred to a
remote site PC when motion detection is
triggered.
Notify by Video transfer: Upon motion
detection, the NVR system will automatically
send and record the selected live videos to a
remote PC (with FreeView Pro standby).
Please follow the steps below for set up.
Click “Video transfer” tab.
Step 1.
Check if the user would like to send
the live video to “ezDispatch Server” and
distribute the live video to the available CMS platform. This function for a large system and
the control center has more than CMS platform.
Step 2.
Check if the user would like to send the live video to “ezDispatch Server” and
distribute the live video to the available CMS platform. This function for a large system and
the control center has more than CMS platform.
Please make sure the ezDispatch had been enable or not when you want to use this
function.
Step 3.
If the user would like to send the live video directly to remote PC, type the remote PC’s
IP address or DNS address.
Step 4.
Enter TCP/IP port number (default port “1501”) for the transfer connection.
Step 5.
Determine the Transfer duration in minutes.
Step 6.
Select the desired video channels to transfer the live videos to remote site PC.
Step 7.
Click “Save” button to save your pending entry, which will be listed at the bottom of
this window.
Step 8.
Repeat steps 2 through 6 to add another “Remote” transfer live video notification entry.
The TCP/IP port number you choose must match the one setup in FreeView Pro program