I-View AnyNet-0401Mini Embedded NVR - Manual (Page 37)

37
4-3.
Camera configuration
4-3-1. Camera configuration:
General: This menu tab is primarily used to set up the OSD options (which text overlay to show in the videos)
and name the locations of the installed cameras. To access this setup section, simply click the “General” tab
at the top from the “Cameras configuration” window.
Click “Advance” button to enable your PTZ
camera return to a default preset position after
system reboot or inactivity for a certain period.
Default operation: Select “Auto scan”,
“Preset scan”, or “Go to preset”
Preset assignment: Select camera for “Go to
preset”
Confirm and exit.
Camera selection
Type camera
location and select
the type and view
direction of the
camera.
Set up color, font,
and display text
position for the
display text.
Enable watermark
function and can
select another image
for watermark.
Listen to live
audio via a 2Vp-p
microphone.
PTZ camera control
protocol selection.
Duplicate another
camera’s settings to
the current camera.
Camera date format
display selection.
Camera information
display selection.
Select if display
camera information in
playback clips or live
vido & playback clips.
This number must
be matched the
connected PTZ ID.