Nikon Z9 Mirrorless Camera User Manual
Page 791
791
Problems and Solutions
Pictures are not displayed on HDMI devices:
Confirm that an HDMI cable is correctly connected.
Output to HDMI devices does not function as expected:
•
Confirm that an HDMI cable is correctly connected.
•
Is [
ON
] selected for [
External rec. cntrl (HDMI)
] in the video recording
menu?
•
Pictures may display correctly if default settings are restored using the
[
Reset all settings
] item in the setup menu.
The Image Dust Off option in NX Studio does not have desired
effect:
Image sensor cleaning changes the position of dust on the image sensor
and will not have the desired effect if:
•
Image Dust Off reference data recorded after image sensor cleaning is
performed are used with photographs taken before image sensor
cleaning is performed, or
•
Image Dust Off reference data recorded before image sensor cleaning
is performed are used with photographs taken after image sensor
cleaning is performed.
The effects of [Set Picture Control], [Active D-Lighting], or [Vignette
control] are not visible:
In the case of NEF (RAW) pictures, the effects can only be viewed using
Nikon software. View NEF (RAW) pictures using NX Studio.
Pictures cannot be copied to a computer:
Depending on the operating system, you may be unable to upload
pictures when the camera is connected to a computer. Copy pictures
from the memory card to a computer using a card reader or other device.