Nikon Z9 Mirrorless Camera - Manual (Page 385)

385 FTP Servers: Connecting via Ethernet or Wireless LAN
6
Obtain or select an IP address.
• Highlight one of the following options
and press
J .
• Press J to proceed when the “configuration complete” message is
displayed.
Option Description
[ Obtain
automatically ]
Select this option if the network is configured to
supply the IP address automatically. A
“configuration complete” message will be
displayed once an IP address has been assigned.
[ Enter
manually ]
Enter the IP address and sub-net mask manually.
• Press J ; you will be prompted to enter the IP
address.
• Rotate the main command dial to highlight
segments.
• Press 4 or 2 to change the highlighted segment
and press J to save changes.
• Next, press X ; a “configuration complete”
message will be displayed. Press X again to
display the sub-net mask.
• Press 1 or 3 to edit the sub-net mask and press
J ; a “configuration complete” message will be
displayed.