Nikon Z9 Mirrorless Camera - Manual (Page 420)

420 Synchronized Release
• To edit remote camera settings from the
master camera, highlight the camera in the
remote camera list and press
2 .
- To temporarily suspend the connection to
the selected camera, select [ OFF ] for
[ Connect to remote camera ].
- To temporarily suspend synchronized
release on the selected camera, select [ OFF ] for [ Synchronized release ].
- If desired, you can then edit the camera’s IP address by highlighting
[ Address ] and pressing 2 . To reconnect, select [ ON ] for [ Connect to
remote camera ]. No connection will be established if no remote camera
exists at the specified address.