Nikon Z9 Mirrorless Camera - Manual (Page 442)

442 Radio AWL
5
f : Establish a wireless connection between the WR-R11a/
WR-R10 and the remote flash units.
• Set the remote units to radio AWL remote mode.
• Set the remote units to the channel you selected for the WR-R11a/
WR-R10 in Step 3.
• Pair each of the remote units with the WR-R11a/WR-R10 according
to the option selected in Step 4:
- [
Pairing ]: Initiate pairing on the remote unit and press the
WR-R11a/WR-R10 pairing button. Pairing is complete when the
LINK lamps on the WR-R11a/WR-R10 and flash unit flash orange
and green. Once a connection is established, the LINK lamp on
the remote flash unit will light green.
- [ PIN ]: Use the controls on the remote flash unit to enter the PIN
you selected in the previous step. Pairing begins when the PIN is
entered. Once a connection is established, the LINK lamp on the
remote flash unit will light green.
6
f : Repeat Step 5 for the remaining remote units.