Nikon Z9 Mirrorless Camera - Manual (Page 363)

363 Computers: Connecting via Ethernet or Wireless LAN
❚❚
The [Connect to Computer] Camera Control
Display
The [ Connect to computer ] display shows the following:
D Loss of Signal
Loss of signal while the camera is connected to a wireless network may
disrupt the connection to Camera Control Pro 2. If the camera network
indicator flashes amber, select [
End current connection ] for [ Connect to
computer ] > [ Network settings ] in the network menu before connecting to
the network again. When the signal is re-established, the camera will
reconnect to Camera Control Pro 2 and resume upload of any pictures that
have yet to be transferred. Note that upload cannot be resumed if you turn
the camera off before transfer is complete.
1
3 2
1 Status : The status of the
connection to the host. The
profile name is displayed in
green when a connection is
established. Errors are also
displayed here (
0 397).
2 Signal strength : Ethernet
connections are shown by d .
When the camera is connected
to a wireless network, the icon
instead shows the wireless
signal strength.
3 Band : The band used by the
wireless network to which the
camera is connected in
infrastructure mode.