Extron electronic Ultra Series - Manual (Page 58)

Operation, cont’d
CrossPoint / MAV Matrix Switchers • Operation 3-14
Example 1: Creating a set of video and audio ties
In the following example, input 5 is tied to outputs 3, 4, and 8. The steps show the
front panel indications that result from your action.
N This example assumes that there are no ties in the current configuration.
1 . Press and release the Esc button (figure 3-5).
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-5 — Clear all selections
2 . To select video and audio for the tie, if necessary, press and release the
RGBHV (CrossPoint switchers) or Video (MAV Plus switchers) button and the
Audio button until the buttons both light (figure 3-6).
I / O
RGBHV AUDIO
Press the RGBHV/Video button to toggle on and off.
The button lights green when selected.
Press the Audio button to toggle on and off.
The button lights
red when selected.
Figure 3-6 — Select RGBHV or video and audio
3 . Press and release the input 5 button (figure 3-7).
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
I
N
P
U
T
S
Press and release the Input 5 button.
The button lights
amber (matrix sizes up to 1616) or
green (matrix sizes 2412 through 3232).
Figure 3-7 — Select an input