Extron electronic Ultra Series - Manual (Page 171)

6-9 CrossPoint / MAV Matrix Switchers • HTML Operation
Email Settings page
Reach the Email Settings page (figure 6-7) by clicking the Email Settings link on
the System Settings page. The Email Settings page has fields for setting up the
switcher’s e-mail notification capabilities. For the e-mail settings and for each row
of the e-mail notification settings, click the Edit button to make the fields available
for editing. The button changes to Save. After editing the settings associated with
the Edit/Save button, click the Save button.
Passwords
System Settings
Firmware Upgrade
Refresh
Figure 6-7 — Email Settings page
Mail IP Address field
The Mail IP Address field displays the IP address and the domain name of the mail
server that handles the e-mail for the facility in which the switcher is installed.
Valid IP addresses consist of four 1-, 2-, or 3-digit numeric octets separated by dots
(periods). Each field can be numbered from 000 through 255. Leading zeroes, up to
three digits total per field, are optional. Values of 256 and above are invalid.
Domain Name field
The Domain Name field displays the domain name that the CrossPoint or MAV
switcher uses to log on to the e-mail server. Standard domain name conventions
(for example: nnnnn@xxx.com) apply.
N The following characters are invalid in a domain name:
{space} + ~ , = ‘ [ ] { } < > ’ “ ; : | \ and ?. The @ character is
acceptable only as the lead-in to the domain name (such as @folklore.net).