Extron electronic Ultra Series - Manual (Page 173)

6-11 CrossPoint / MAV Matrix Switchers • HTML Operation
6 . Click the Firmware Upgrade link.
7 . Click the Browse button. An open file window appears.
8 . Navigate to the folder where you saved the firmware upgrade file. Select the
file.
N Valid firmware files must have the file extension “.S19”. Any other file
extension is not a firmware upgrade.
N The original factory-installed firmware is permanently available on the
CrossPoint or MAV switcher. If the attempted firmware upload fails for any
reason, the switcher automatically reverts to the factory-installed firmware.
9 . Click the Open button.
10 . Click the Upload button. The firmware upload to the switcher may take a few
minutes.
File Management Tab
File Management Page
To delete files such as user-supplied HTML pages from the switcher or to upload
your own files to the switcher, click the File Management tab. The switcher
downloads the file management HTML page (figure 6-9).
Figure 6-9 — File Management page
N The files listed in figure 6-9 are shown for example only and may not be present
on your switcher.
To delete a file, click the Delete button adjacent to the unwanted file.
Upload your own files as follows: