Extron electronic Ultra Series - Manual (Page 193)

B-3 CrossPoint / MAV Matrix Switchers • Reference Information
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ...................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level ................................... AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance ........................... Inputs 1 to 8: 75 or 510 ohms, switchable
Inputs 9 and up: 510 ohms
Output impedance ........................ 75 ohms
Max. input voltage ........................ 5.0 Vp-p
Max. propagation delay ............... <120 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
Audio — audio models only
Routing
2412 Series .......................... 24 x 12 stereo matrix
2424 Series .......................... 24 x 24 stereo matrix
3216 Series .......................... 32 x 16 stereo matrix
3232 Series .......................... 32 x 32 stereo matrix
Gain ................................................. Unbalanced output: -6 dB; balanced output 0 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.03% @ 1 kHz at nominal level
S/N .................................................. >90 dB, balanced, at maximum output (21 dBu), unweighted
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >80 dB @ 1 kHz
CMRR .............................................. >75 dB @ 20 Hz to 20 kHz
Audio input — audio models only
Number/signal type ..................... 24 or 32 stereo, balanced/unbalanced
Connectors ..................................... (24 or 32) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... >10k ohm, balanced/unbalanced, DC coupled
Nominal level ................................ 0 dBu (775 mV)
Maximum level .............................. +19.5 dBu, (balanced or unbalanced) at 0.01% THD+N
Input gain adjustment .................. -18 dB to +24 dB (default = 0 dB), adjustable per input by RS-232/422,
Ethernet, or front panel
N 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output — audio models only
Number/signal type ..................... 12, 16, 24, or 32 stereo, balanced/unbalanced
Connectors ..................................... (12, 16, 24, or 32) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ................. >+21 dBu, balanced or unbalanced at 0.10% THD+N
Maximum level (600 ohm) ........... >+15 dBm, balanced or unbalanced at 0.10% THD+N
Output volume range ................... 0 to 64 (-75.8 dB to 0 dB) in 1 dB increments from steps 1 to 64, 12 dB
increment from step 0 to 1; default = 64 = 0 dB