Extron electronic Ultra Series - Manual (Page 133)

4-23 CrossPoint / MAV Matrix Switchers • Programmer’s Guide
X5#
= Verbose mode 0 = clear/none (default for Telnet connection)
1 = verbose mode (default for RS-232/RS-422 connection)
2 = tagged responses for queries
3 = verbose mode and tagged for queries
N If tagged responses is enabled (modes 2 and 3), all read commands return the constant string and the value as the set command does
(for example, the read matrix name command
E
CN
}
, returns Ipn•
X3)]
).
X5$
= Flow control h ardware, software, none (only the first letter required)
X5%
= Data pacing (in ms between bytes) 0000 (default) - 1000
X5^
= Time (in 10-ms increments) to wait for characters 10 (= 100 ms, default) - 32767
X5&
= Time (in 10-ms increments) to wait between characters 2 (= 20 ms, default) - 32767
X5*
= Port timeout interval (in 10-sec. increments) 1 (= 10 seconds) - 65000 (default is 30 = 300 seconds = 5 minutes)