Extron electronic Ultra Series - Manual (Page 130)

Programmer’s Guide, cont’d
CrossPoint / MAV Matrix Switchers • Programmer’s Guide 4-20
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Information requests
N
X1&
= Inputs Total number of inputs for this switcher
X1*
= Outputs Total number of outputs for this switcher
X1(
= Part number 60-nnn-nn
X2)
= Firmware version number to second decimal place (x.xx)
X2!
= Verbose firmware version-description-upload date/time
X2@
= Voltage Positive or negative voltage and magnitude
X2#
= Temperature Degrees Fahrenheit
X2$
= Fan speed RPM
X$
= Power supply 0 = not OK
1 = OK
Information request I V X1& X X1* •A X1& X X1*] V X1& X X1* is the video
matrix size. A
X1&
X
X1*
is
the audio matrix size.
Example:
MAV Plus 3216 HDA I V32X16•A32X16
]
Request part number N X1(] See appendix A for part
numbers.
N There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which
is the overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest
optional Extron firmware update, which is available at www.Extron.com.
Query controller firmware
version Q X2)]
Example: Q 1.23
] The factory-installed
controller firmware version
is 1.23 (sample value only).
Query controller firmware
version (verbose) 0Q X2)
-
X2!
-
X2!] Provide a detailed status
of the Ethernet protocol
firmware, the controller
firmware, and any firmware
upgrade. The firmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the firmware
has a bad checksum or an
invalid load. ?.?? indicates
that firmware is not loaded.
Response description: Ethernet protocol firmware version-controller firmware version-updated firmware version
]
Example: 0q
Ethernet protocol
firmware
Response:
Description
CrossPoint/MAV firmware version
1.23-0.14(0.20-32x32 Series - , 00 2000 00:00:00 GMT)-0.25*(0.24-32x32 Series -Thu, 20 Mar 2003 16:39:21 GMT)
Updated firmware version
* indicates the version running Upload date and time
Request system status S X2@ • X2@ • X2@ • X2@ • X2@ • X2@ • X2@ • X2# • X2$ • X2$ • X$ • X$]
Response description: +5V•+3.3V•+2.5V•Fan voltage•-5V•-12V•+12V•Temp•Fan1 RPM•Fan2 RPM•Primary PS•Secondary PS
]
Example:
4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
Fans receiving 11.52 V Secondary power supply is on and Ok
Fan 1 rotating at 753 RPM 5V power system at 4.98V